 |
Standard Swivel for Bridge Lamp, Brass Ball 1-1/4" height #75150 or #55029 |
 |
Wing Nut Swivel for Bridge Lamps $5 (does not include socket cap) |
|
Thumbnail pictures - click on images to enlarge |
|
 |
#50823 Cast
Column, antique brass finish,
5-7/8" high, top inside 7/8", bottom diameter 1" $11 (only 2 left in stock, discontinued style)
|
 |
#11421 9-inch Cast Metal Column,
Antique Brass Finish, slips 1/4 IPS pipe.
#11423 Bronze Finish (darker) available
CLICK ON PICTURES TO SEE LARGER IMAGE |
| This site is no longer active. Visit our new website at http://www.lampshademaker.com
|
|
 |
#10075 Footed Floor Base, antique brass finish.
6" inset, 2-1/4" high, 12-1/4" diameter, slips 1/4 IPS,
weighs 5 lbs., #10077 same, with Bronze Finish #14321 6" Flat Round Onyx Insert |
 |
Cast Brass Floor Lamp Base 11-3/4" wide, 4" high, top seating diameter 2" Slips 1/8 IPS pipe, unfinished, #E5707 - temporarily out of stock |
 |
Die Cast Metal Lamp Base, 4-3/4" diameter, 1-1/2" high, seating diameter 3-1/2" slips 1/8 IPS (for table lamp) Antique Brass finish, #M121 |
 |
2-piece Cast Brass Columns, slip 1/4 IPS pipe
Left: 6" height, 1" top diameter, hex bulge 1-7/8", bottom diameter 1-5/16" #E5116 Right: 9" height, 1-5/8" top diameter, hex bulge 2-7/8", bottom diameter 1-15/16", E5118 |
 |
3/4" Ivy Embossed Tubing & #11427
Column See Page 1 New Lamp Parts
5" Onyx break #10078 Cast Metal Base, antique brass finish, 5" inset, 3-1/2" high, 12-1/2" diameter, slips 1/4 IP, weighs 6 lbs 12 oz. |
 |
Italian Cast Brass Floor Lamp Base, Height 3-1/2",
Slips 1/4 IPS, top diameter 1-7/8", bottom diameter 11-3/4",
Brushed Brass #60862 Shown above base, Cast Brushed Brass Break #50252, inside top diameter 1-3/4", bottom diameter 2", height 3-1/2", slips 1/4 IPS, |
 |
Italian Cast Brass 3-legged Floor Base. Unusual detail of woman's face atop a Lyre Harp. Slips 1/4 IPS Pipe, Height 3-1/4", Top diameter 1-1/2", bottom outside diameter 14", Brushed Brass, #60872 |
 |
(These are high-quality Cast Brass pieces from Italy)
Shown on Lyre Base, Italian Cast Brass Column #50222 Brushed Brass, 7-1/2" tall, top diameter 1-3/8", bottom diameter 1-1/2" (also comes in Raw Brass or Highly Polished Brass) Onyx Break, 3" round ball #S661
|
 |
Onyx Breaks: Round, Flat, Cylinder, Donut (slip 1/4 IPS
pipe)
4"Flat Round 3/4" thick 5" Flat Round 3/4" thick 6" Flat Round 3/4" thick 2-1/2" x 1-1/8" Donut shape 5" x 1-1/2" Cylinder Column (Flat Rounds do NOT have edge cord hole) Unless otherwise stated, all Onyx pieces have center hole for 1/4 IP pipe commonly used in floor lamps. Every piece of Onyx is different in coloring and marking. |