|
|
Die Cast Metal Mini-Lamp Base
3-3/4" diameter, 2" high, slips 1/4 IPS pipe, 2-5/8" seating diameter, Antique Brass finish #M123 |
| Click on any picture to enlarge full size | |
|
#28054
Discontinued by factory Cast Metal, antique finish 5-1/4" top seating area, 2" tall |
|
Click on pictures to enlarge
|
#10010 (formerly 56896) Cast Brass, unfinished 5-1/4" top, 1-3/8" high, outside diameter 9", 1/8 IP hole Brass Polished & Lacquered
Brass Satin Antique Finish
|
 |
#10013 Cast Brass Victorian Base, polished & lacquered. 2-13/16" top diameter, 8" overall diameter, 1-1/8" tall. For 1/8 IP pipe Antique brass finish - add $ |
 |
#10000
Cast Brass Victorian Base, polished & lacquered 3" top diameter, 8-1/2" overall diameter, 2-1/4" high, for 1/8 IP pipe Antique brass finish - add $ |
 |
Step-Up Base or Plate, Unfinished Brass
These half-inch tall step-up bases can be "stacked" on top of one of the bases shown above to fill up the seating area, and place your lamp base on top of the flat surface. Since these only come in unfinished brass, we suggest "antiqueing" both pieces to match. They are not available in polished brass. |
 |
High-Quality Cast Brass Bases, polished & lacquered, for 1/8 Pipe S940 S945 S950 S955 Antique Brass finish - Add $
|
| Base S950
with 4" S552 Step-Up Base
|
|
| Solid Brass
Insert Bases
|
|
| Click on any picture to enlarge full size | |
 |
#61488
6" top seating area, Spun Brass |
 |
#26008
6" Brass Filigree base This style used to replace many Capodimonte style bases which have Dolphin, or Fish Leg base as pictured below.
|
|
CLICK ON IMAGES FOR LARGE PICTURES
Cast metal, antiqued brass finish, comes in 3 sizes. 4" M1840 2" high, leg-to-leg 5-5/8", overall top seating area, min. 3-11/16", max. 4-1/8" 5-1/2" M1841 2-1/2" high, leg-to-leg 7-1/4", minimum seating 4-3/8", maximum seating 5-1/8" 6-1/8" M1842 2-1/4" high, leg-to-leg 7-1/4", minimum seating 4-7/8", maximum 5-5/8"
Small M1840 Fish leg Base on 4" Onyx, on top of Large M1842 Fish leg Base on 6" Onyx |
|
Square Bases for Table Lamps |
|
Click on pictures to enlarge |
Cast Brass Base Top diameter 5" Height 1-5/8" 1/8 IPS hole 60690 Raw (unfinished) Brass 60691 High polished Brass 60692 Brushed Brass
|
 |
#50381
Cast Metal antique brass finish, 2" high, 6-1/2" square, for 1/8 IP pipe (Matching column available) |
 |
E5700 Polished Cast Brass Square 6-3/4" x 6-3/4", Height 1-7/8", tapped for 1/8 IPS pipe, with cord hole. Antique Brass finish - Add $
|
| Click photos to enlarge to full size catalog pages and pictures. | |
 |
M1623 Antique Finish Cast Metal Small Base 3-3/8" wide, 4" tall Concave seating diameter 2-1/2", Tapped 1/8 IPS (table lamp pipe size)
|
|
|
DISCONTINUED - Out of stock. 58125 Antique Finish Cast Metal Bottom diameter 6-1/4", Top inset 2-1/4", Height 3", for table lamp 1/8 IPS pipe size.
|
M129 |
M129 set
|
| M129
5" or 6" inset, Cast Metal Antique Finish Right: Same base with 6" Onyx insert included Click on pictures to enlarge |
|
|
Best Quality Brass Victorian Style Bases
available in 3 finishes - antique brass, polished & lacquered, or unfinished Call for current pricing 888-994-LAMP (5267) |
|
| 50424 set
Antique Brass finish Cast Metal with 4" Onyx 2-1/8" high plus 3/4" thickness of Onyx 8" spread
|
|
Cast Metal bases with hole for bottom light pigtail - for table lamps |
|
|
Click pictures to enlarge #50424
4" insert, 8" spread, 2-1/8" high Antique Brass finish Brass Plated & Lacquered Finish
|
|
|
|
Special Order
|
|
50423 with night light hole Cast metal, 4-1/8" seating diameter, 2" high, 6" wide, (7-1/2" diagonal, foot-to-foot) |
|
|
56973 with Onyx Cast Brass with 4" Onyx 7-3/4" spread, 7/8" high plus 3/4" thickness of Onyx |
antique brass finish - add $ |
Fine Quality Oriental Style Solid Brass Bases Click on pictures to enlarge. Call for prices |
|
|
Lion's Foot Base configurations "Lion's Foot" - High quality Brass four-part base assembly for lamps with size 1/8 IPS pipe. Note: These pieces can be modified to fit 1/4 IPS floor lamp pipe by drilling the center hole larger. click on pictures to see larger images E-5310 Base only, 9-1/2" spread, 2-1/2" tall, 4-1/2" seating area. E-5350 Round column 4" E-5351 Center Column Cup E-5165 Center Base CAP Not shown: 2 pound Loader Weight for under base
The dull color shown above is Unfinished Brass; the shinier pieces are Polished & Lacquered - All pieces in stock are Unfinished Brass |
|
|
|
|
#56793 Cast Brass 4-1/8" insert, 7/8" high, 7-3/4" spread Antique brass finish - add $
|
Victorian style lamp
base
Base, 1-3/4" high, 2-3/8" top Raw brass finish Antique brass finish - add $ |
M1844 Cast Metal, Antique Brass finish 7" diameter, 2" high, 5-1/4" seating diameter, slips 1/4 IPS pipe SOLD OUT - has been discontinued by manufacturer. This was a very popular, nice base. We're searching for new supplier. |
|
Wood Lamp Bases - Genuine Rosewood, Mapleclick on pictures to enlarge 
Genuine Rosewood prices are skyrocketing because of the diminishing supply of raw material. Beware of imitations - some companies sell much cheaper species of wood bases with a rosewood finish applied, but still call them "Rosewood" bases.
|
|
|
Walnut Lacquered Finish |
|
Base for Table Lamp, Solid Brass, Victorian Style, slips 1/8 IPS $40 (only one available... can't get any more just like it)
|
|
|
|
Die Cast Metal Lamp Base
4-3/4" diameter, 1-1/2" high, seating diameter 3-1/2" slips 1/8 IPS (for table lamp) Antique Brass finish, #M121 |
|
|
Die Cast Metal Lamp Base
5-3/4" diameter, 1-1/4" high, seating diameter 3" slips 1/8 IPS (for table lamp) Antique Brass finish M#159 |
|
CLICK ON IMAGES FOR LARGE PICTURES "Lily Pad" Table Lamp Base and Column, cast metal, antiqued brass finish.Base #50436 3" high, 9-3/4 diameter Column # 50446 12" tall, slips 1/4 IPS |
|
|
CLICK ON IMAGES FOR LARGE PICTURES |
|
| To
order, or obtain further information, please call
Hannah Murphy |
|
